Welcome to our website.

Flex-PCB

Persisting in "High quality, Prompt Delivery, Aggressive Price", now we have established long-term cooperation with consumers from equally overseas and domestically and get new and old clients' large comments for Flex-PCB, medical-circuit-board , Cable-Assembly , FR4-PCB-UL-RoHS , We welcome you to visit our factory and look forward to establishing friendly business relationships with customers at home and abroad in the near future. With this motto in mind, we have turn out to be amongst probably the most technologically innovative, cost-efficient, and price-competitive manufacturers for Flex-PCB, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.


  • Wholesale Price Pcb-Manufacturing-Companies - Double-Sided-PCB – Kaz

    Wholesale Price Pcb-Manufacturing-Companies - Double-Sided-PCB – Kaz

    Using the right thickness of material is important for building FR4 PCBS. Thickness is measured in inches, such as thousands, inches, or millimeters. There are a few things to consider when choosing a FR4 material for your PCB. The following tips will  simplify your selection process: 1. Select thin FR4 materials for building panels with space constraints. Thin materials can support the various sophisticated components needed to build the device, such as Bluetooth accessories, USB connec...
  • Manufacturer of Cctv-Camera-Pcb - 8-Layers-PCB – Kaz

    Manufacturer of Cctv-Camera-Pcb - 8-Layers-PCB – Kaz

    This is an 8 layers PCB board with the specification as below: 8 layers Shengyi FR4 1.0mm ENIG 2u” Inner 0.5OZ, out 1OZ Matt black soldmask White silkscreen Plated on filled via With blind via 10 pcs per panel   How is the multilayer board laminated? Laminating is the process of bonding each layer of circuit sheets into a whole. The whole process includes kiss pressing, full pressing and cold pressing. In the kiss pressure stage, the resin infiltrates the bonding surface and fills the gaps in...
  • Low price for Multilayer-Pcb-Prototype - 8-Layers-PCB – Kaz

    Low price for Multilayer-Pcb-Prototype - 8-Layers-PCB – Kaz

    This is an 8 layers PCB board with the specification as below: 8 layers Shengyi FR4 1.0mm ENIG 2u” Inner 0.5OZ, out 1OZ Matt black soldmask White silkscreen Plated on filled via With blind via 10 pcs per panel   How is the multilayer board laminated? Laminating is the process of bonding each layer of circuit sheets into a whole. The whole process includes kiss pressing, full pressing and cold pressing. In the kiss pressure stage, the resin infiltrates the bonding surface and fills the gaps in...
  • 18 Years Factory Power-Supply-Circuit-Board - HDI-PCB – Kaz

    18 Years Factory Power-Supply-Circuit-Board - HDI-PCB – Kaz

    Specification for this HID PCB: • 8 layers, • Shengyi FR-4, • 1.6mm, • ENIG 2u”, • inner 0.5OZ, outer 1OZ oz • black soldmask, • white silkscreen, • plated on filled via, Specialty: • Blind & buried vias • Edge gold plating, • Hole density: 994,233 • Test point: 12,505 • laminate/pressing: 3 times • mechanical + controlled depth drill + laser drill (3 times) HDI technology mainly has higher requirements on the size of the printed circuit board aperture, the width of the wiring, and ...
  • Well-designed Fr4-Pcb-Ul-Rohs - Conformal Coating – Kaz

    Well-designed Fr4-Pcb-Ul-Rohs - Conformal Coating – Kaz

    Advantages of automatic three-proof paint coating machine: one-time investment, life-long benefit. 1. High efficiency: automatic coating and assembly line operation greatly increase productivity. 2. High quality: The coating amount and thickness of the three-proof paint on each product are consistent, the product consistency is high, and the three-proof quality is stable and reliable. 3.  High precision: selective coating, uniform and accurate, coating precision is much higher than manual. ...
  • High reputation Hdi-Printed-Circuit-Boards - Single-Layer-FR4-PCB – Kaz

    High reputation Hdi-Printed-Circuit-Boards - Single-Layer-FR4-PCB – Kaz

    What are the advantages of FR4 materials in PCB manufacturing FR-4 material, this is the abbreviation of glass fiber cloth, it is a kind of raw material and substrate circuit board , the general single, double-sided and multi-layer circuit board are made of this! It is a very conventional  plate! Such as Shengyi, Jiantao (KB), Jin An Guoji are the three major domestic manufacturers, such as only do FR-4 materials of circuit board manufacturers: Wuzhou Electronics, Penghao Electronics, Wanno E...
  • China Cheap price Electronic-Board-Manufacturers - Special-Material-PCB – Kaz

    China Cheap price Electronic-Board-Manufacturers - Special-Material-PCB – Kaz

    Details for this Rogers PCB Layers: 2 layers Material: Rogers 4350B Base board thickness: 0.8mm Copper thickness: 1 OZ Surface Treatment: Immersion Gold Soldmask Color: Green Silkscreen Color: White Application: RF communication equipment Rogers is a type of high-frequency board produced by Rogers. It is different from the conventional PCB board—epoxy resin. It has no glass fiber in the middle and uses ceramic base as the high-frequency material. Rogers has superior dielectric constant ...
  • Factory wholesale Special-Material-Pcb - 4 layers PCB – Kaz

    Factory wholesale Special-Material-Pcb - 4 layers PCB – Kaz

    Specification for the 4 layers PCB:  Layers: 4  Board Material: FR4  Finish Board thickness: 1.6mm  Finish copper thickness: 1/1/1/1 OZ  Surface Treatment: Immersion Gold (ENIG) 1u”  Soldmask Color: Green  Silkscreen Color: White  With Impedance Control   The biggest difference between PCB multilayer boards and single-sided and double-sided boards is the addition of an internal power layer (to maintain the internal electrical layer) and a ground layer. The power supply and ground wire ne...
  • Special Price for Rigid-Flex-Pcb-Circuit - 10-layers-PCB – Kaz

    Special Price for Rigid-Flex-Pcb-Circuit - 10-layers-PCB – Kaz

    Detail specification for this 10 layers PCB: Layers 10 layers Impedance Control Yes Board Material FR4 Tg170 Blind & Buried Vias Yes Finish Board Thickness 1.6mm Edge Plating Yes Finish Copper Thickness inner 0.5 OZ, outer 1 OZ Laser Drilling Yes Surface Treatment ENIG 2~3u” Testing 100% E-testing Soldmask Color Blue Testing Standard IPC Class 2 Silkscreen Color White Lead Time 12 days after EQ   What is a multilayer PCB and what are the characteristics of a multilayer b...
  • Hot-selling Multilayer-Pcb-Production - Testing – Kaz

    Hot-selling Multilayer-Pcb-Production - Testing – Kaz

    When a circuit board is soldered, checking whether the circuit board can work normally, usually do not directly supply power to the circuit board, but follow the steps below: 1. Whether the connection is correct. 2. Whether the power supply is short-circuited. 3. Installation status of components. 4. Perform open circuit and short circuit tests first to ensure that there will be no short circuit after power on. The power-on test can only be started after the above hardware test before power-o...
  • Fast delivery Multilayer-Pcb-Supplier - HDI-PCB – Kaz

    Fast delivery Multilayer-Pcb-Supplier - HDI-PCB – Kaz

    Specification for this HID PCB: • 8 layers, • Shengyi FR-4, • 1.6mm, • ENIG 2u”, • inner 0.5OZ, outer 1OZ oz • black soldmask, • white silkscreen, • plated on filled via, Specialty: • Blind & buried vias • Edge gold plating, • Hole density: 994,233 • Test point: 12,505 • laminate/pressing: 3 times • mechanical + controlled depth drill + laser drill (3 times) HDI technology mainly has higher requirements on the size of the printed circuit board aperture, the width of the wiring, and ...
  • Super Lowest Price High-Density-Interconnection - Special-Material-PCB – Kaz

    Super Lowest Price High-Density-Interconnection - Special-Material-PCB – Kaz

    Details for this Rogers PCB Layers: 2 layers Material: Rogers 4350B Base board thickness: 0.8mm Copper thickness: 1 OZ Surface Treatment: Immersion Gold Soldmask Color: Green Silkscreen Color: White Application: RF communication equipment Rogers is a type of high-frequency board produced by Rogers. It is different from the conventional PCB board—epoxy resin. It has no glass fiber in the middle and uses ceramic base as the high-frequency material. Rogers has superior dielectric constant ...
  • Factory Free sample Medical-Pcb - 12-layers-PCB – Kaz

    Factory Free sample Medical-Pcb - 12-layers-PCB – Kaz

    Some more information for this 12 layers PCB Board Layers: 12 layers Finish board thickness: 1.6mm Surface Treatment: ENIG 1~2 u” Board Material: Shengyi S1000 Finish Copper thickness: 1 OZ inner layer, 1 OZ out layer Soldmask Color: Green Silkscreen Color: White With Impedance Control Blind & buried vias What are the basic principles of impedance and stack design considerations for multilayer boards? When designing impedance and stacking, the main basis is PCB thickness, number of layer...
  • Factory wholesale Multilayer-Pcb - FPC reflexible board – Kaz

    Factory wholesale Multilayer-Pcb - FPC reflexible board – Kaz

    FPC flexible board   FPC flexible board is a kind of flexible circuit board with the simplest structure, which is mainly used to connect with other circuit boards. PCB flexible board refers to FPC flexible circuit board. FPC flexible circuit board, also known as flexible board, is a kind of PCB with excellent flexibility. FPC flexible circuit board has the advantages of high density of wiring and assembly, good flexibility, small volume, light weight and thin thickness, simple structure, conv...
  • Factory wholesale Multilayer-Pcb - DIP-Assembly – Kaz

    Factory wholesale Multilayer-Pcb - DIP-Assembly – Kaz

    Dual in-line package is also called DIP package, DIP or DIL for short. It is an integrated circuit packaging method. The shape of the integrated circuit is rectangular, and there are two rows of parallel metal pins on both sides, called row needle. The components of the DIP package can be soldered in the through holes plated on the printed circuit board or inserted into the DIP socket. Integrated circuits often use DIP packaging, and other commonly used DIP packaging parts include DIP switche...
  • OEM/ODM China Lead-Free-Pcb - 10-layers-PCB – Kaz

    OEM/ODM China Lead-Free-Pcb - 10-layers-PCB – Kaz

    Detail specification for this 10 layers PCB: Layers 10 layers Impedance Control Yes Board Material FR4 Tg170 Blind & Buried Vias Yes Finish Board Thickness 1.6mm Edge Plating Yes Finish Copper Thickness inner 0.5 OZ, outer 1 OZ Laser Drilling Yes Surface Treatment ENIG 2~3u” Testing 100% E-testing Soldmask Color Blue Testing Standard IPC Class 2 Silkscreen Color White Lead Time 12 days after EQ   What is a multilayer PCB and what are the characteristics of a multilayer b...
  • Special Price for Rigid-Flex-Pcb-Circuit - HDI-PCB – Kaz

    Special Price for Rigid-Flex-Pcb-Circuit - HDI-PCB – Kaz

    Specification for this HID PCB: • 8 layers, • Shengyi FR-4, • 1.6mm, • ENIG 2u”, • inner 0.5OZ, outer 1OZ oz • black soldmask, • white silkscreen, • plated on filled via, Specialty: • Blind & buried vias • Edge gold plating, • Hole density: 994,233 • Test point: 12,505 • laminate/pressing: 3 times • mechanical + controlled depth drill + laser drill (3 times) HDI technology mainly has higher requirements on the size of the printed circuit board aperture, the width of the wiring, and ...
  • High Quality Pcb-Fabrication - DIP-Assembly – Kaz

    High Quality Pcb-Fabrication - DIP-Assembly – Kaz

    Dual in-line package is also called DIP package, DIP or DIL for short. It is an integrated circuit packaging method. The shape of the integrated circuit is rectangular, and there are two rows of parallel metal pins on both sides, called row needle. The components of the DIP package can be soldered in the through holes plated on the printed circuit board or inserted into the DIP socket. Integrated circuits often use DIP packaging, and other commonly used DIP packaging parts include DIP switche...
  • High definition Double-Sided-Pcb-Quick-Turn - 8-Layers-PCB – Kaz

    High definition Double-Sided-Pcb-Quick-Turn - 8-Layers-PCB – Kaz

    This is an 8 layers PCB board with the specification as below: 8 layers Shengyi FR4 1.0mm ENIG 2u” Inner 0.5OZ, out 1OZ Matt black soldmask White silkscreen Plated on filled via With blind via 10 pcs per panel   How is the multilayer board laminated? Laminating is the process of bonding each layer of circuit sheets into a whole. The whole process includes kiss pressing, full pressing and cold pressing. In the kiss pressure stage, the resin infiltrates the bonding surface and fills the gaps in...
  • Factory wholesale Multilayer-Pcb - 8-Layers-PCB – Kaz

    Factory wholesale Multilayer-Pcb - 8-Layers-PCB – Kaz

    This is an 8 layers PCB board with the specification as below: 8 layers Shengyi FR4 1.0mm ENIG 2u” Inner 0.5OZ, out 1OZ Matt black soldmask White silkscreen Plated on filled via With blind via 10 pcs per panel   How is the multilayer board laminated? Laminating is the process of bonding each layer of circuit sheets into a whole. The whole process includes kiss pressing, full pressing and cold pressing. In the kiss pressure stage, the resin infiltrates the bonding surface and fills the gaps in...